Off-hook monitoring, Analog adapter, Separate speaker volume for internal vs. co calls – Panasonic VB-43320 User Manual
Page 18: Description, Operation
![background image](/manuals/181726/18/background.png)
Release Notes
June
CPC-EX, Version 1 .O (Preliminary)
Off-Hook Monitoring
Description
Off-Hook Monitoring lets you put a call on speaker while the handset is off-hook.
You can still communicate with the outside
party
via the handset, but you will also
be able to hear the other party on the phone’s speaker. He/she will only be able to
hear what is spoken through your handset, however audio will not be transmitted
through your microphone.
Operation
1.
During a call, press the ON/OFF key.
l
Another receiver
path
is established on the phone’s speaker -- you
can now hear the outside party on the speaker as well as in the
handset.
l
Your phone’s microphone is muted so that the outside
party
hears
only what is spoken through your handset. (To mute handset
transmission, press
2.
To turn off Off-Hook Monitor (“kill” the speaker but stay on the line
with the outside party through the handset), press ON/OFF again.
Separate Speaker Volume for Internal vs. CO calls
Description
You can now establish separate volumes for internal (intercom) and external (CO)
calls.
To adjust volume levels, press the VOLUME key (
A
or
during the appropriate
call state.
Notes
Adjusting speaker volume will affect only the speaker (i.e., not the handset), and
vice-versa.
Analog Adapter
Description
The Analog Adapter (VB-44100) consists of a base adapter and PC board which is
installed on the underside of the phone. It is used to connect the 44-series
largedisplay phone to an analog device such as an SLT telephone, cordless phone,
FAX machine, or modem. This
the same phone line to be used to alternate
between normal phone calls and analog communications. (To install, see the
instructions supplied with
New Phone Features
l
Page 19
Technical Manuals Online! - http://www.tech-man.com