Panasonic VB-43320 User Manual

Page 16

Panasonic@

June

Release Notes

CPC-EX, Version 1 .O (Preliminary)

Notes

call (FF3

and after dialing a busy extension (FF3

Use existing addresses

thru

to assign select key

features to Flexible Function Screens.

Use existing addresses

to assign screen text.

Select key features for

Fixed

Function Screens will not appear on

small-display phones.

While the select key feature is displayed, you can execute the feature
by pressing the or select key.

Variable Mode

with an FF-Key.

You can program the

6 1 code

into an FF-key: In progr

mode, press FF5

The FF-key will toggle Variable Mode on/off while the extension is idle or in an

off-hook/dial-tone state. The FF-key LED will remain lit (red) while Variable
Mode is “On”. (You can also use a one-touch key to toggle Variable Mode on and

however, one-touch keys do not contain an LED to indicate when Variable

Mode is on.)

Variable Mode After Power-Cycling.

If Variable Mode is “On”, the extension

will stay in Variable Mode even after power-cycling (system is powered down,
then powered back up).

Incompatibility with olderphone versions.

Variable Mode is available on the new

44-Series phones only.

Conditions under which Variable Mode does not work.

Variable Mode will be

temporarily overridden under the following conditions: during an incoming
message state, hold state, message-waiting state, or call-waiting state. Incoming
messages include:

CO Queuing
Incoming [trunk no.]

no.]

H-Recall

Call wait

no.]

Recall Hnt [Hunt Group no.]
DISA Incoming
Call [extension no.]
Transf [extension no.]
Recall [trunk no.]
HOLD Recall

New Phone Features

Page 17

Technical Manuals Online! - http://www.tech-man.com