Panasonic VB-43320 - Manual (Page 15)

Release Notes Panasonic@
CPC-EX, Version 1 .O (Preliminary) June
l
Or, to exit the directory without selecting a number to dial, press
the END key or go on-hook.
Notes Incompatibility with older phone versions. Directory Mode is available on the
new 44-Series phones only.
Hot Dial Pad and Directory Mode. The Hot Dial Pad feature (FF3
will not work on an extension in Directory Mode.
Variable Mode
Description
This new feature applies to the 44-series small-display phone only (i.e., phones
with a LCD display).
When the phone is in Variable Mode, the features for Flexible Function Screen
select keys 1 and 2 will display during each of the following call states:
Call State Proaram Address*
l
During an intercom call FF3
l
During CO
l
During a trunk call FF3
l
After dialing a busy extension FF3
l
In these addresses, you assign a Flexible Function Screen (2539) to appear on
the extension while it is in the call state.
Operation
The select keys on the small-display phone are labeled and to the
left and right of the display’s 2nd line. Pressing select key 1 on the left) or
select key 2 on the right) will perform the displayed feature.
To use Variable Mode:
1. Activate Variable Mode by pressing ON/OFF ON/OFF.
l
When you dial ‘61 in the above sequence, the 1st line of the LCD
will display “Variable md ON”. The display will return to normal
when you press the second
ON/OFF.
l
The l 61 code toggles Variable Mode on and off. Press ON/OFF
l 61
ON/OFF again to turn Variable Mode off.
2. While the extension is engaged in an intercom call, the 2nd line will
display select key 1 and 2 features from the Flexible Function Screen
assigned to display The same applies when the
extension receives CO dial tone (FF3 during a trunk
Page 16 . New Phone Features
Technical Manuals Online! - http://www.tech-man.com