Club information, Changing the club settings – Precor C934 User Manual
Page 23
page 23
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 19
Display console keypad.
These next few pages provide information that lets you customize the treadmill for
your Club. It is not information that your customer needs or, necessarily, should
see. This section covers the following information about how to:
•
select the unit of measure: U.S. standard or Metric
•
set maximum speed, workout, and pause times
•
display the odometer and other useful information
•
connect to CSAFE compatible devices
Note: If your customers are interested in the learning more about the C934 treadmill,
you may wish to direct them to the manual available on Precor’s web site
(www.precor.com). (The manual that appears on the web site does not contain the
information found in this section.)
Club Information
CHANGING THE CLUB SETTINGS
The Club “custom” settings are accessed through specific codes that help eliminate
unauthorized access. Refer to Diagram 19to locate the keys. Information that you
can access and features that can be customized are as follows:
•
Units of Measure — Select between U.S. Standard and Metric displays.
•
Maximum Speed — Determines the maximum speed that a user can select.
Selections range between 0.5 to 11 mph (1 - 18 kph).
•
Maximum Workout Time — Sets a maximum limit on workout time.
Note: Remember that the user will get an additional five-minute cool down period
appended to a completed course. So, adjust the maximum time limit accordingly.
•
Maximum Pause Time — Sets the maximum duration in which a person
can “pause” his or her workout.
•
Odometer, Hours of Use, Software Version, and Error Log —The treadmill
stores the cumulative miles or kilometers, the number of hours that the unit has
been in use, the software version and software type (which is valuable when
calling Customer Support), and an error log (useful when troubleshooting).
Gently, press and hold
the
▼ or ▲ key to view
the available selections.