beautypg.com

Turning the unit on and off – Precor C934 User Manual

Page 21

background image

page 21

C

O

M

M

E

R

C

I

A

L

P

R

O

D

U

C

T

S

D

I

V

I

S

I

O

N

21. Adjust the rear deck. Diagram 18. To raise the rear deck, insert the ¼-inch

hex key (H). Make sure that the key is fully engaged and turn it clockwise.
Turning the hex key counterclockwise lowers the unit.

22. Plug in the power cord. Connect the power receptacle into an appropriate

power outlet. Refer to

Grounding Instructions on page 3.

CAUTION: The treadmill requires a dedicated, grounded circuit.
A 20 amp dedicated circuit is recommended. Make sure that no other
product or machine uses the same circuit as the treadmill.

TURNING THE UNIT ON AND OFF

Use the ON/OFF (I/O) power switch to turn the unit ON and OFF. This switch is
located on the front of the unit, near the power cord.

To complete the installation of the treadmill, continue with

Checking the Alignment

of the Running Belt.

Diagram 18

Adjust the
rear deck.