Polaris 700 Fusion - Manual (Page 124)

121
TROUBLESHOOTING
IQ Suspension Troubleshooting
Problem Solution (perform only one change at a time)
Rear suspension
bottoms too easily
S
Adjust torsion spring preload to achieve proper static sag
(see page 44).
S
Change torsion spring to stiffer optional spring (see your
dealer).
S
Revalve rear track shock (see your dealer).
Rides too stiff in
rear
S
Check for binding suspension shafts and grease all pivot
points.
S
Adjust torsion spring preload to achieve proper static sag
(see page 44).
S
Change torsion spring to softer optional spring (see your
dealer).
S
Check for proper track tension (see page 107).
Machine darts from
side to side
S
Check ski alignment (see page 110).
S
Make sure spindles and all steering components turn freely.
S
Ensure skags are straight on skis.
S
Check rail slide/replace if worn (see page 112).
S
Install dual skags.
S
Set static sag (see page 44).
Front end pushes
S
Check for worn skags.
S
Set static sag (see page 44).
S
Install single skag (see your dealer).
S
Rotate RRSS to high position (see page 48).
Steering is heavy
S
Make sure spindles and all steering components turn freely.
S
Check ski alignment (see page 110).
S
Check skags and skis for damage.
S
Set static sag (see page 44).