Philips MCM8 - Manual (Page 24)

24
3139 115 23001
English
Temporarily deactivating the wake up timer
Listening to an external source
You can listen to the sound of the connected
external device through your system’s speakers.
CD TUNER TAPE AUX
REPEAT PROGRAM SHUFFLE
TAPE A/R DISPLAY
CLOCK TIMER TIMER ON/OFF NATURAL
REC DIM SLEEP SNOOZE
L
R
AUDIO OUT
R +
–
L –
+
AM ANTENNA L R
AC MAINS
SPEAKERS 6Ω
AUX/ CDR IN
FM ANTENNA
PLAY
AUX
3
2
1
L R
AUX/
CDR IN
1
Use the red / white audio cables to connect
the system’s AUX /CDR IN (R/L) terminals
to the AUDIO OUT terminals on the other
audio /visual device (such as a TV, VCR, Laser
Disc player, DVD player or CD recorder.)
➜ If the connecting device has only a a single
audio out terminal, connect it to the AUX /CDR
IN left terminal. Alternatively, you can use a
“single to double” cinch cable, but the output
sounds still remain monaural.
2
Press AUX repeatedly.
➜ Select “ AUX” when connecting to a TV, VCR
or Laser Disc player.
➜ Select “ AXU/CDR” when connecting to a CD
recorder or DVD player.
3
Press PLAY on the connected device to start
playback.
Helpful Hints:
– All the sound control features (INC SURR, for
example) are available for selection.
– Always refer to the owner’s manual of the other
equipment for complete connection and use details.
Timer Operations Other Connection
Temporarily deactivating the wake up
timer
You are only able to activate the Snooze
function within 30 minutes after the timer wake
up from standby mode.
1
After timer wake up, press SNOOZE on
the remote.
➜ The system will switch to standby mode for
five minutes. After that, it resumes the timer last
selected source again.
2
To cancel the snooze function, press
SNOOZE
again.
Setting the Sleep Timer
The sleep timer enables the system to switch to
Eco Power standby mode automatically at a
preset time
1
Press SLEEP on the remote repeatedly until
it reaches the desired preset turn-off time.
➜ The selections are as follows (time in
minutes:)
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™
OFF ™ 15 …
➜
SLEEP
appears on the display, except if " OFF"
is selected.
➜ To view or change the setting, repeat the
above.
2
Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
" SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To cancel the sleep timer
● Press SLEEP repeatedly until " OFF" appears,
or press the STANDBY ON B button.
001-027-MCM78_37-Eng 4/8/04, 15:01 24