Philips MCM8 - Manual (Page 22)

22
3139 115 23001
English
Tape Operations/Recording
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation for recording
1
Press TAPE.
2
Load a recordable tape into the tape deck.
3
Press í or ë on the remote to select the
recording tape side.
➜
A appears on the display for the reverse
side.
➜
B appears on the display for the forward
side.
4
Press TAPE A/R on the remote repeatedly
to select a recording mode.
➜
å for recording on one side only.
➜
∂ ∂ ∂ ∂ ∂ for recording on both sides.
5
Prepare the source to be recorded.
CD
– load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜
REC
starts flashing.
● It is not possible to change tape side.
● It is not possible to listen to another source.
● It is not possible to activate the timer
function.
One touch recording
1
Press CD, TUNER or AUX to select the
recording source.
2
Start playback of the selected source.
3
Press and hold REC until
REC
icon starts
flashing on the display panel to start
recording.
To stop recording
● Press Ç on the system.
Helpful Hint:
– One Touch Recording is not possible in TAPE
mode, "
SELECT SOURCE" will appear.
CD Synchronized start recording
1
Press CD.
●
If you want to start recording from a desired
track, press
í or ë .
➜ You can program the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”.)
2
Press and hold REC to start recording.
➜ The disc will start playback automatically.
To select another track during
recording
1
Press ÉÅ to interrupt recording.
2
Press í or ë to select the desired track.
3
Press ÉÅ to resume recording.
To stop recording
● Press Ç.
➜ Recording and disc playback will stop
simultaneously.
001-027-MCM78_37-Eng 4/8/04, 15:01 22