Maxos – Philips TTX400 User Manual
Page 29
Philips indoor luminaires
8.28
Maxos
Light-line systems
Maxos TL-D IP63 closed reflector units
Maxos IP63 closed reflector units are ready-to-install dedicated
luminaires for the Maxos trunking system. They are designed for
industrial applications requiring good protection of reflectors against
dust, in particular the automotive industry and food industry. The unit
can be easily cleaned with a wet cloth.
The housing is made of steel with a white coating, while the cover is
made of tempered glass or, optionally, polycarbonate (PC); the inner
reflector is made of aluminum.
Maxos IP63 closed reflector units combine the functions of Maxos
electrical units, reflectors and covers. They are designed for reliable
mounting on Maxos trunking sections in TL-D lengths. A connector
block is mounted on top of the units for electrical connection to the
trunking. Mechanical connection is realized by means of a safe bracket
with knee-lever clasp around the trunking. IP63 classification is valid
for the complete lamp, optical and ballast compartment; however, the
classification for the total system including IP20 trunking sections is
IP20.
The standard range is 1-lamp and 2-lamp TL-D 58 W with HF or
conventional ballast and TL5 80 W with HF ballast, all to be mounted
on the TL-D Maxos trunking system, optionally with EL3 emergency
lighting.
The units come with inner aluminum reflectors for wide-beam (WB)
or asymmetrical-beam (A) light distribution. White louvers (4MX093
1/2 58 L-IP63-unit WH) are available as accessories.
Please note that Maxos is not designed for application in regular humid
environments.
Maxos TL-D
IP63 Reflector unit
Type
4MX014
Lamp
Fluorescent:
1 x or 2 x MASTER TL-D / G13 / 58 W or 1x
or 2x TL5 80 W
Gear
Electro magnetic (low loss), 230 or 240 V / 50 Hz:
Inductive, parallel compensated (IC)
Electronic, 220 - 240 V / 50 - 60 Hz:
High Frequency Performer (HFP)
Reflector
Wide beam (-WB)
Asymmetric (-A)
Option
Emergency lighting: 3 hours (EL3)
Material
Housing: steel, white coated
Cover: tempered glass (GT) or polycarbonate
(PC) (optional)
Accessory
Steel, white inlay louver (4MX093 1/2/58 L-IP63-
unit WH)
Remarks
The electrical connection to the trunking is realized
via a pre-mounted connector block, the mechanical
connection via a bracket with knee-lever clasp
around the trunking
IP63 for optical compartment inclusive lamp- and
ballast compartment only, can be used with regular
IP20 flat ribbon trunkings
Main applications
Industry: automotive and food (cleanable front
screen)
Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.
Maxos 4MX014 IP63 closed reflector
unit
Maxos 4MX014 IP63 closed reflector
unit with louver
Indoor_2008_Chapter_08_LIS.indb 28
20-05-2008 13:23:25