Panasonic CQ-C3100U - Manual (Page 12)

34
CQ-C3400/3300/3200/3100U CQ-C3400/3300/3200/3100U
35
Audio Settings
[VOLUME "]: Up
[VOLUME #]: Down
Note:
≥ Press [DISP] (display) to return to the
regular mode.
≥ If no operation takes place for more than
7 seconds in audio setting (2 seconds in
the volume setting), the display returns to
the regular mode.
≥ The volume can also be adjusted directly
using [VOLUME] on the main unit.
(page 23)
1
Press [VOLUME]
(SEL: select).
Volume
Default:18 Setting range: 0 to 40
Bass/Treble
You can adjust the bass and treble sound.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: j12 dB to i12 dB (by 2 dB)
Balance/Fader
You can adjust the sound balance among the
front, rear, right and left speakers.
Default: BAL (balance) CNT (center)
FAD (fader) CNT (center)
Setting range: 15 levels each
Subwoofer Level
You can change the subwoofer volume level.
Default: 0 dB
Setting range: MUTE (subwoofer mute),
j6 dB to i6 dB (by 2 dB)
Subwoofer Low Pass Filter (LPF)
You can select the upper limit frequency of the
sound from subwoofer.
Default: 80 Hz
Setting range: 120 Hz/80 Hz
2
Turn [VOLUME].
(Press [VOL "] or [VOL #]
on the remote control unit.)
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: Right enhanced
[VOLUME #]: Left enhanced
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: 120 Hz
[VOLUME #]: 80 Hz
[VOLUME "]: Front enhanced
[VOLUME #]: Rear enhanced
E
N
G
L
I
S
H
15
E
N
G
L
I
S
H
16
Mute/Attenuation
You can select mute or attenuation when [MUTE]
is pressed. (page 23)
Default: MUTE
[VOLUME "]: Decrease
10 steps
(Attenuation)