Paradyne COMSPHERE 6700-A2-GB22-00 - Manual (Page 43)

Custom Network Interface Settings
5-9 Issue 1 September 1994
Choosing Modem Settings
Use Modem... to specify modem interaction commands and
modes for SLIP interfaces.
.
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Modem... from the Setup menu. The Modem
Settings dialog box appears, as shown in Figure 5-6.
Table 5-4 describes the fields on the Modem Settings
dialog box.
Figure 5-6. Modem Settings Dialog Box
4. Select the appropriate modem from those listed under
Modem Defaults. The Network Configuration feature
then uses default commands based on your choice.
If your modem is not listed, select Hayes
r
which works
across almost all modem types. Select None to
indicate a direct null-modem connection, which does
not require any dial.