Philips VR 655 - Manual (Page 14)

14
RF OUT
ANT.IN
AUDIO
VIDEO
IN OUT
RF OUT
ANT.IN
AUDIO
VIDEO
IN OUT
To check, edit or erase the programmes
1 Press TIMER .
2 Press PLAY 5 or STOP ∞ to select
“PROGRAM REVIEW” then press OK/
STATUS .
3 Press OK/STATUS repeatedly to view the more
detailed programme information.
• When you press the button for the first time, the
detailed programme information for Programme 1
appears. By pressing this button repeatedly, you can
review the detailed information of all other
programmes.
4 If you want to change the programme setting
shown on the TV screen, press the following
buttons:
VCR CH 5/∞ : Changes the channel.
START +/– :Changes the start time.
STOP +/– :Changes the stop time.
SPEED :Changes the tape speed.
DATE +/– :Changes the date.
If you want to erase the programme setting
shown on the TV screen, press
CLEAR . The
detailed information of the next programme
appears.
5 If necessary, press TIMER to exit from the menu
operations.
Note:
• This function does not work for OTR (One Touch
Recording).
How to see the programme list
1 Programme numbers
2 Preset channel numbers
3 Start time
4 Stop time
5 Start date
“D” stands for “DAILY,” and
“W” stands for “WEEKLY.”
• If the programme has worked once for the Daily
recording, “DAILY” will be shown instead of the
start date.
• If the programme has worked once for the Weekly
recording, the day of the week (in this example,
“MON”) will be shown instead of the start date.
Note:
• Even if a power failure occurs, the VCR keeps your
timer programs. However, the clock time and other
menu settings are lost if it lasts for more than 3 minutes.
As a result, when the power is supplied again to this
VCR after the power failure, set the clock time and turn
off the VCR.
Each timer program you have made will start unless its
start time already passes.
1 Insert a source tape in the playing VCR and a
blank tape in the recording VCR.
• If a tape without the record tab is inserted in the
playing VCR, playback automatically starts. In this
case, press the
STOP button.
2 Turn the channel on the TV to your video
channel.
3 Press
VCR CH
5 or ∞, pointing the remote
control at this VCR, to select the external line
input. Select “AV IN” on the TV screen.
4 Press
SPEED , pointing the remote control at this
VCR, until the desired tape speed (SP or LP)
appears on the screen.
5 Press the PLAY
3 button on the playing VCR.
6 Press REC/OTR ● at this VCR.
Remember: Press the buttons in steps 5 and 6
simultaneously to avoid missing any of the recording.
Dubbing from any VCR (or camcorder) to another
is simple.
Explanations on this page uses this VCR as the
recording VCR.
Refer also the manual supplied with the other VCR
(for playback)
1
Connect the recording VCR (this VCR) and
the playing VCR.
2 Connect the recording VCR (this VCR) to
the TV.
Recording VCR (this VCR) Playing VCR
To RF OUT
From Audio output to
AUDIO IN
From Video output to
VIDEO IN
Note:
VR407/55 has single AUDIO IN/OUT jack.
PR CH START STOP DATE
1 12 20:00 22:00 W10/06
2 25 10:00 10:45 MON
3 03 15:00 15:15 D16/10
4 45 23:30 23:00 DAILY
5
6
7
8
NEXT: OK END: TIMER
1 2 3 4 5
Tape Duplication
●
407/55A5 01.10.2, 8:57 AM 14