Philips VR 655 - Manual (Page 10)

10
You can make the picture softer or sharper or
distinct the picture when playing back the tape.
SmartPicture is set to AUTO when you receive the
VCR.
❍
Select SmartPicture Mode
1 Press SMARTPICTURE
button. The current setting will
appear on the screen for about
5 seconds.
2 While the current setting appears, press the
SMARTPICTURE button repeatedly, the setting
changes as follows.
AUTO:
Normally select this mode.
DISTINCT:
Select this mode when you want the distinct
picture. The picture detail is emphasized.
SOFT:
Select this mode when you want the soft
picture. The signal noise of the picture is
softened.
SHARP:
Select this mode when you want the sharp
picture. The picture edge is emphasized.
Note:
• It is recommended that the SmartPicture is set to
“SOFT” if playback picture is noisy.
1
With this function, you can prevent the VCR
operations from being misused.
To use Child Lock
When the VCR is turned on, press and hold
POWER on the remote control for more than 10
seconds to turn off the VCR.
The POWER indicator will blink on the display
window.
While POWER indicator on the display window is
blinking, you cannot turn on the VCR by pressing
POWER on the VCR.
To cancel Child Lock
Press and hold
POWER on the remote control for
more than 10 seconds to turn on the VCR.
The POWER indicator on the display window will
stop blinking and the VCR is turned on.
You can also cancel the child lock function by
unplugging the AC power cord.
Child Lock
SmartPicture
AUTO
Eject cassette
You can eject the tape simply by pressing STOP/
EJECT ■ / 0 on the front panel even while the
VCR is turned off.
When you press
STOP/EJECT ■ /
0 on the front
panel, the VCR automatically turns on, ejects the
tape, then turns off.
Auto playback
When a tape is inserted, the VCR turns on. If the
record tab is removed, playback begins.
Auto rewind
When a tape reaches its end during playback or fast
forwarding, the VCR rewinds the tape and stops.
Memory rewind power off
When you press POWER during rewinding, the
VCR turns off after rewinding is completed.
Repeat Playback
When you press and hold PLAY 3 for more than 5
seconds, you can play back the same tape
repeatedly (100 times).
When the tape runs to its end, the VCR
automatically rewinds the tape, and starts playback.
Automatic Operations
407/55A5 01.10.2, 8:57 AM 10