Chapter 7. using the cable cover – Paxar 4 User Manual

Page 46

Text mode
Original mode

Chapter 7.

Using the Cable Cover

You use the cable cover with the industrial version of the
Monarch® Renegade® 4 printer. The cover holds the cable in
place. You can use the cable cover with or without the
printer’s boot.

Attaching the Cable Cover––––––––––––––––––––––––––––––––––––

To attach the cable cover:

1. Remove the cable from the printer.

2. Boot Only. Insert the spacers into the holes on the lower

right side of the printer. (You can have the boot on or off
the printer.)

7-1

TC9490OH Rev. C 3/97