Paxar 4 - Manual (Page 34)

Cleaning –––––––––––––––––––––––––––––––––––––––––––––––––––
You may need to clean the printhead, platen roller, pinch
rollers, peel bar, and peel blade:
✦ after 8 rolls of supplies
✦ daily if your printer is in an excessively dirty, hot or
humid environment
✦ when you see voids in the print as shown.
To clean the printhead, platen roller, pinch rollers, peel bar,
and peel blade:
c
Do Not touch the printhead with your hands. This may
damage the printhead.
1. Turn the power off and open the printer.
2. Remove the label roll and ribbon cassette (when cleaning
the printhead).
Voids Correct Print
Chapter 4. Care and Maintenance
4-3
TC9490OH Rev. C 3/97