Pentax ist - Manual (Page 30)

28
1
Turn the power ON and
press the DATE button to
display date mode on the
LCD panel.
The display changes from TV/AV
to the date mode.
2
Keep pressing the DATE
button for 3 seconds on the
date mode display, the
"year" digits will start to
blink.
3
Each time the DATE button
is pressed, the blinking
digits change in the
following order: Year-Month-
Day-Hour-Minute-: .
Select the desired digits.
4
Turn the Select dial right or
left to change the digits to
change the blinking digits.
The digits increase by one each time
the select dial is turned right and the
digits decrease when turned to left.
ADJUSTING THE DATE AND TIME
Step 4