Pentax ist User Manual
Page 156
[CF6]
Superimposing the focus points
1
Superimposes the focus points
2
Disables the superimpose function
[CF7]
Enabling shutter release before the built-in flash
is fully charged
1
Disables shutter release until the flash is ready
2
Enables shutter release before the flash is charged
[CF8]
Using the built-in flash as a wireless control for
the AF360FGZ
1
Discharges the built-in flash to adjust the exposure
2
Built-in flash controls the AF360FGZ
[CF9]
Setting the flash pop-up button’s function
during wireless operation with the AF360FGZ
1
Disables the built-in flash
2
Discharges the built-in flash once for a test
3
Discharges the built-in flash consecutively for modeling
[CF10] Setting the film rewind method
1
Automatically rewinds the film at the end of the roll
2
Disables automatic film rewind
*To rewind the film, press the mid-roll rewind button.
[CF11] Setting the status of the end of the film when rewound
1
Rolls up the film completely
2
Leaves the end of the film unwound
[CF12] Setting the self-timer delay time
1
Self-timer delay of 12 sec.
2
Self-timer delay of 2 sec. with mirror lock-up
[CF13] Setting the shutter release delay time with the
remote control
1
Picture taken after 3 sec.
2
Picture taken immediately
[CF14]
Setting auto focusing during remote control operation
1
Auto focusing not used
2
Auto focusing used
[CF15] Setting the LCD panel illumination
1
Illuminated when the main/preview switch is set to
preview
2
Illuminated automatically in low light condition
3
Not illuminated
[CF16] Setting the mode dial illumination
1
Illuminates
2
Does not illuminate
[CF17] Enabling shutter release with the aperture ring
set to other than the position
1
Disables shutter release if the aperture ring is not
set to the position
2
Enables shutter release