Panasonic KX-F780 - Manual (Page 9)

9
Installation and
Connection
Installing the recording paper
1 A Open the back lid by lifting up the tabs located
on both sides.
B Install a recording paper roll in the unit.
¡ Make sure that the shiny side of the paper is
facing down and there is no slack, tape, or
glue residue on the paper roll.
Note:
¡ Only use the included roll of paper or specified recording paper, or else the print quality may be affected
and/or excessive thermal head wear may occur.
¡ The beginning of some recording paper rolls are secured with glue or tape.
Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation.
¡ To order recording paper, see page 75.
A
B
Paper stacker
2 Insert the leading edge of the recording paper
between the recording paper roller and the silver
plate.
3 Close the back lid by gently pressing down on both
ends.
Install the paper stacker.
correct incorrect
Recording paper roller
Silver plate
Installing the paper stacker
Tab