Philips DCM263/55 - Manual (Page 11)

12
Connect TV
Connect video cables
With this connection, you can watch video
from the unit on the TV screen.
You can select the best video connection that
your TV supports.
Option 1: Connect through HDMI (for a •
HDMI, DVI or HDCP-compliant TV).
Option 2: connect through component
•
video (for a standard TV or Progressive
Scan TV).
Option 3: connect through composite
•
video (CVBS) (for a standard TV).
Option 1: Connect through HDMI
Connect HDMI (High Definition Multimedia
Interface), DVI (Digital Visual Interface), or
HDCP (High-bandwidth Digital Contents
Protection)-compliant TVs through HDMI
for the best picture quality. This connection
transmits both video and audio signals.
Through this connection, you can watch DVDs
that contain HD (High-Definition) content.
Note
Some TVs do not support HDMI audio •
transmission.
This connection provides the best video
•
quality.
1
Connect an HDMI cable (not supplied)
to:
FM
ANT DC
IN SUB WOOFER OUT Yr/Cr Yb/Cb Y AV-
OUT HDMI
COMPONENT OUT
TV
HDMI IN
3 Connect
Place the unit
1
Place the unit near to the TV.
2
Place the subwoofer at the corner of the
room or at least one meter away from
the TV.
3
Place the main unit on a hard, flat and
stable surface.
Tip
You can also mount the unit on the wall with •
the supplied screws.
Note
To avoid magnetic interference or unwanted •
noise, never place this apparatus and speakers
too close to any radiation devices.
Never place this unit in an enclosed cabinet.
•
Install this unit near the AC outlet where the •
AC power plug can be easily reached.
Before you connect
1
Place a soft cloth on a hard, flat, stable
surface.
2
With its front panel face-down, place the
unit onto the cloth.
EN