Planet Technology VC-412 User Manual

Page 44

VC-412 User’s Manual

APPENDIX B – UPDATE VC-101S FIRMWARE TO

R4.5 REMOTELY THROUGH VC-412

The purpose of this appendix is to upgrade older versions of VC-101 (R2 or R4) into the

newest version (R4.5) remotely through VC-412. The new version will contain

auto-speed function which can seek the maximum transmission speed automatically.

The default speed of version R4.5 VC-412 Mbps downstream/1 Mbps upstream but the

default speed of version R2 is 11 Mbps symmetric and default speed of version R4 is 15

Mbps downsteam/17 Mbps upstream. Therefore you will need to adjust both VC-412 and

VC-101S to a complementary speed in order to establish link. You can perform these

procedures remotely via VC-412 console or telnet.

Access to the ICD Command interface.

Adjust the speed on VC-412 to the remote modem’s speed with the following

command:

LT -

For example if port-2 is connected to a version R4 VC-101S the command would be:

LT 2-Q

If it is connected to a version R2 VC-101S then use the command would be:

2-P

Note: Connection will establish after issue above command. Please note this setting