Planet Technology VC-412 - Manual (Page 19)

VC-412 User’s Manual
15
3.3.3 Reboot System
Reboot System option reboots the
VC-412
when it seems to be malfunctioning. It will not
reset or change any settings. Select the option from the drop-down menu and press the
Set Value button.
3.4 Network Configuration
3.4.1 Protocol Control
Selecting on the Network link will allow you to set access methods and set the capability
of future firmware updates. In the Protocol Control section you are presented with the
selections shown below.
HTTP Login Username: Set username for Web interface access to the VC-412.
(Note: The password for the Http interface is the same as the console password.)
HTTP Security: When disabled you will allow users on your network to view
settings and statuses of the VC-412, however modifications are prohibited unless
users login through “Become Administrator” option. When enabled, viewing is
forbidden unless users provide a correct password to login.
BOOTP/DHCP: Obtain IP address from DHCP server.
Telnet Control: Permit or forbid users to login via Telnet.
TFTP Upgrade: Permit or forbid users to upgrade SNMP firmware via TFTP.