Planet Technology VC-412 - Manual (Page 27)

VC-412 User’s Manual
23
the VC-412.
Note: The password for HTTP is the same as the password in Console, but you will need
to specify username for HTTP access.
HTTP Security Control: When enabled, anyone who tries to access
the VC-412 via HTTP is required to enter a password and username
before able to see any settings or information. When disabled, the
VDSL Managerial Switch will allow all users to see and monitor the
settings of the VDSL Managerial Switch, however they will be unable to
make changes, unless they become an administrator by selecting the
“Become Administrator” button in the Web interface.
BootP/DHCP Control: Obtain IP address from DHCP server.
Telnet Control: Permit or forbid access to the VC-412 via the Telnet Console.
TFTP Upgrade Control: Permit or forbid users to upgrade SNNP firmware via
TFTP.
I. To change login username, select option 1 and enter new
username, otherwise press Enter key without entering any
information to cancel operation.
II. To Enable or Disable Network properties, select the option
number and press Enter key. Enter the new value and press