Planet Technology VC-412 User Manual

Page 37

VC-412 User’s Manual

VDSL port Enable
Speed Mode = Auto Speed

To exit ICD command prompt

VLAN Command

Show the current VLAN settings

Set VLAN to ON

Set VLAN to OFF

VG -, ...,

Select the to belong to

The available VLAN group number is from 1 to 16. Issue this

VG command will automatically switch the VLAN mode to

USER DEFINED.

Example: “VG 2-1,2,3,B” will create VLAN group 2 with

member ports:1,2,3 and B.

Empty VLAN Ports group

VDSL Command

LT -

Set VDSL to on local(LT) end

There are six speed levels to select from when

setting VDSL port speed. A, B, C, D is for

VC-101S firmware version R4.5. P is for

firmware version R2 and Q is for firmware

version R4.

A: Downstream 4 Mbps/Upstream 1 Mbps (R4.5)
B: Downstream 5 Mbps/Upstream 5 Mbps (R4.5)
C: Downstream 11 Mbps/Upstream 11 Mbps (R4.5)
D: Downstream 15 Mbps/Upstream 17 Mbps (R4.5)
P: Downstream 11 Mbps/Upstream 11 Mbps (R2)
Q: Downstream 15 Mbps/Upstream 17 Mbps (R4)

Example: “LT 2-B” will configure local port 2’s speed to
symmetric 5Mbps

RT -

Set VDSL to on remote(RT) end

LR -

Set VDSL to preset .

Please then issue S command if you want to save this

settings.

LR -

Set VDSL to auto-speed

Save data on remote side of VDSL

Port Command

Show all counters for all ports

Show all counters for

Clear all counters for all ports

Clear all counters for