Cache – Pantech PG-3300 User Manual
Page 92
91
Gateway/Proxy: If you set the Connection Type to WAP,
Gateway is displayed. If you set it to HTTP, Proxy is displayed.
Press the [
o
] key to display the subfunctions IP Address,
IP Port, Login ID and Password then input the appropriate
information for each of the following subfunctions, inputting the
information provided by your service provider.
APN: (Access Point Name.) Press the [
o
] key to input the
appropriate APN.
Login ID: Press the [
o
] key to input the appropriate login ID.
Password: Press the [
o
] key to input the appropriate
password
•
DNS Settings: Input the appropriate IP address for the
Domain Name Server. You can input the primary and
secondary DNS.
•
Bearer: Select the bearer type for each type of network
access. Press the [
l
] or [
r
] scroll key to select GSM
Only or GPRS Only.
•
Reset Profile: Press the [
o
] key to reset the settings of
the selected profile. Press the [
l
] or [
r
] scroll key to
select Yes or No.
Cache
This function sets up your phone’s cache. This feature is
used to store WAP pages directly on your phone, to display
them rapidly when you return to them.
Cache Mode
This function sets up the cache memory check, which
verifies whether the WAP page’s information is already
stored in your phone’s cache memory.
❶
Press the [Menu] Soft key then select 8.Connectivity
then select 1.WAP then select 7.Cache then select
1.Cache Mode.
❷
Select one of the following options.
•
Always Check: The cache is always checked whenever
a URL is loaded.
•
Never Check: The cache is never checked.
Clear Cache
This function clears all data stored in the cache (recently
visited WAP pages).
Press the [Menu] Soft key then select 8.Connectivity then
select 1.WAP then select 7.Cache then select 2.Clear
Cache.
WAP
NOTE:
This function is available only when your Connection
Type is set to HTTP.
060602_PG-3300_EN(00)�‚�¬.indd 91
2006.6.8 4:53:49 PM