Organizer, Converter, Stop watch – Pantech PG-3300 User Manual
Page 86: Timer
calculation then press = to display the result.
Press the [
c
] key to clear the current line of your
calculation.
Press and hold the [
c
] key to delete your entire
calculation.
Converter
Converter converts a figure between different units, i.e.
length, area, volume, weight, and temperature.
❶
Press the [Menu] Soft key then select 7.Organiser then
select 6.Converter.
❷
Select Length, Area, Volume, Weight, or Temperature.
•
Press the [d] scroll key to move to the next line,
press the [
l
] or [
r
] scroll key to select a target unit,
and press the number keys to input numbers.
•
Press the [d] scroll key again to move to the next
line and select a result unit; the correct answer is
displayed automatically.
•
Press the [.] Soft key to input a decimal.
•
The result is automatically recalculated when you
change the units or value.
Stop Watch
The Stop Watch measures time for all sorts of sports.
Stop Watch measures time for all sorts of sports.
Press the [Menu] Soft key then select 7.Organiser then
select 7.Stop Watch.
•
Press the [ ] key to start the Stop Watch.
•
Press the [ ] key to pause the Stop Watch, then press
the [ ] key to restart the Stop Watch.
•
When you press the [Lap] Soft key, up to four lap times
are displayed in turn. When you press the [Lap] Soft key
a fourth time, the Stop Watch stops.
•
Press the [Reset] Soft key to reset all Stop Watch
timers.
Timer
Timer sets the alarm bell to ring at a preset time.
Press the [Menu] Soft key then select 7.Organiser then
select 8.Timer.
•
Press the [Set] Soft key to input a time and the number
of minutes to count down then press the [
o
] key.
85
Organizer
Tip:
To input a decimal, press the [.] key.
060602_PG-3300_EN(00)�‚�¬.indd 85
2006.6.8 4:53:37 PM