Planet Technology POE-2400 - Manual (Page 21)

18
The page includes the following configurable data:
Object Description
Choose what the PoE Injector Hub should do following power-up: transmit a DHCP request, or
manual setting (Disable). DHCP Client
The DHCP client function only works if you haven't assigned a static IP address that different
than the PoE Injector Hub default IP. Once the default IP has been changed the DHCP will not
effective and the PoE Injector Hub will continue using the manually entered static IP. If you have
changed thePoE Injector Hub to a static IP address, you can set the IP address back to its
default IP address or you can reset the PoE Injector Hub back to factory default. And then you
can enable the DHCP client function to work.
The factory default is Disable.
IP Address The IP address of the PoE Injector Hub.. The factory default value is 192.168.0.100.
Subnet Mask The IP subnet mask of the PoE Injector Hub.. The factory default value is 255.255.255.0.
Gateway The default gateway of the PoE Injector Hub.. The factory default value is 192.168.0.254.
This field helps to identify the description of PoE Injector Hub. Description
4.3.3 Password Setting
This function allows changing admin password, fill the form and click on the “Apply” button. As showed in Figure 4-6
Figure 4-6 Password Setting screen
The page includes the following configurable data:
Object Description
Displays the login user name. Login Name
Enter the old password is required before entering the new password. Old Password
Specifies the new password. The password is not displayed. As it entered an “ y” corresponding
to each character is displayed in the field.
New Password
(The maximum length is 16 characters)
Confirm This confirms the new password. The password entered into this field must be exactly the same
as the password entered in the Password field.