Paradyne 12-Port SHDSL Access Multiplexer SAM2000G-12 - Manual (Page 7)

The SAM2000G-12, SAM2000Q-12 and SAM2000-12 each have nine SHDSL bandwidth options; default
is 272 kbps. Distance capabilities at each bandwidth vary, dependent upon the type of line code being
utilized. Distances listed below assume the use of 26 American Wire Gauge (AWG) cable; connections
made with cable of a greater gauge will link up at greater distances. The ports on your module may not link
up if your cables are in poor condition or if cable distances are greater than the configured bandwidth will
support. Although it is sometimes possible for links to be achieved under such conditions, traffic quality
may be effected (e.g., packets may be dropped).
6.0 ADDITIONAL INFORMATION
6.1 Data Storage
Configuration backup is inherent in Net to Net Technologies IP DSLAMs. SAM2000G default
parameters remain in place unless changed via CLI, NMS or SNMP. Once changed, new
configurations are automatically recorded in both RAM and NVRAM.
6.1.1 Memory
6.1.1.1 Random Access Memory (RAM)
Data stored in SAM2000G RAM will be erased if the module is removed from your IP
DSLAM or if your IP DSLAM loses power.
6.1.1.2 Non-Volatile Random Access Memory (NVRAM)
Data stored in the NVRAM of your IP DSLAM's MUM will remain intact (even if your IP
DSLAM loses power) unless deliberately cleared or reconfigured.
6.1.2 Local Files
Management and interface module configurations can be saved on your PC, or local network,
both as a backup and/or for use as a template for future configurations, via the MUM in your
IP DSLAM. Management configurations and all interface module port configurations are saved
SHDSL BANDWIDTH kbps 2,320 2,064 1,552 1,040 784 528 400 272 144
DISTANCE
SAM2000G-12
TC/PAM line code:
SHDSL feet 11,300 12,200 12,800 16,000 16,800 18,400 19,400 20,200 25,400
meters 3,444 3,719 3,901 4,877 5,121 5,608 5,913 6,157 7,742
SAM2000Q-12
2B1Q line code
feet 10,400 10,800 13,400 14,800 15,800 17,400 18,200 19,200 23,800
meters 3,170 3,292 4,084 4,511 4,816 5,304 5,547 5,852 7,254
SAM2000G-12
CAP line code
feet 11,000 11,900 12,600 15,500 16,000 17,900 18,900 23,100 24,700
meters 3,353 3,627 3,840 4,724 4,877 5,456 5,761 7,041 7,529
210-0000026 rev07