Panasonic WV-Q151S - Manual (Page 3)

5
4
Installations
Be sure to read "Precautions" on the page xx before installation. The Installation Guide of the
network camera, WV-NS202, shall be read as well.
1. Remove the decorative cover.
q Loosen the fixing screw (unremov-
able) to be used for cover fall pre-
vention.
w Unhook the decorative cover from
the hooks (3 positions) of the cam-
era mounting plate and remove the
decorative cover by turning it coun-
terclockwise.
e Take the inner shell out.
2. Remove the camera mounting plate.
Remove the screws (M4, 3 positions)
and remove the camera mounting plate
by turning it counterclockwise.
Disengage the portion (a) from the hole
(b) (2 positions).
FR ON T
LO CK
FR ON T
Fixing screw to be used for
cover fall prevention
Hook
FR ON T
FR ON T
LO CK
(b)
Camera mount-
ing plate
Screw (M4)
(a)
Major Operating Controls and Their Functions
Decorative cover
Microphone stand*
Fixing screw to be used
for cover fall prevention
Camera mounting
plate
Mounting base
Hole for microphone cable
Dome cover
Safety wire angle (Accessory)
Safety wire (Accessory)
Ceiling mount bracket
Decorative cover
WV-NS202
Dome cover
Ceiling board
Roof space
* If a microphone is used, mount the microphone on the rubber-made microphone stand.
Unless the microphone is used, cut the rubber with a nipper or conduct another treatment.
Inner shell