Selecting a disc 69, Pausing cd playback 69, Introduction of advanced – Pioneer AVH-P5000DVD User Manual
Page 69: Operations, Using cd text functions 69, Available accessories, Selecting a disc, Pausing cd playback, Introduction of advanced operations, Using cd text functions
! If an error message such as ERROR-02-XX is
displayed, refer to the multi-CD player owner
’s
manual.
! If there are no discs in the multi-CD player ma-
gazine,
NO DISC is displayed.
Selecting a disc
1
Touch LIST.
2
Touch your favorite disc.
Selectable discs are highlighted.
3
Touch ESC to return to the ordinary dis-
play.
Pausing CD playback
% Touch de during playback.
# To resume playback at the same point that you
turned pause on, touch de again.
Introduction of advanced
operations
You can only use these functions with a multi-
CD player that supports them.
1
Touch AV MENU and then touch
FUNCTION MENU to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2
Touch ESC to return to the playback dis-
play.
# To return to the previous display, touch BACK.
Function and operation
REPEAT, RANDOM, SCAN and
COMPRESSION operations are basically the
same as that of the built-in DVD player.
Function name
Operation
REPEAT
Refer to Repeating play on page 27.
However, the repeat play ranges
you can select are different from
that of the built-in DVD player. The
repeat play ranges of the multi-CD
player are:
! MULTI-CD – Repeat all discs in
the multi-CD player
! TRACK – Repeat just the cur-
rent track
! DISC – Repeat the current disc
RANDOM
Refer to Playing tracks in random
order on page 28.
SCAN
Refer to Scanning tracks or folders
on page 28.
COMPRESSION
Refer to Using compression on
page 29.
Multi-CD player has COMP (com-
pression) and DBE (dynamic bass
emphasis) functions.
The settings can be switched as
below:
OFF
—COMP1—COMP2—OFF—
DBE 1
—DBE 2
Notes
! If you select other discs during repeat play,
the repeat play range changes to
MULTI-CD.
! If you perform track search or fast forward/re-
verse during
TRACK, the repeat play range
changes to
DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks begins again.
! If the multi-CD player does not support
COMP/DBE, you cannot operate this function.
Using CD TEXT functions
You can use these functions only with a CD
TEXT compatible multi-CD player.
The operation is the same as that of the built-
in DVD player.
Refer to Text information on page 26.
Available accessories
En
69
Section
04
A
vailable
accessories