Pioneer AVH-P5000DVD - Manual (Page 36)

4 Touch c or d next to FREQUENCY to se-
lect the frequency to adjust.
Low:
40Hz
—80Hz—100Hz—160Hz
Mid: 200Hz
—500Hz—1kHz—2kHz
High: 3.15kHz
—8kHz—10kHz—12.5kHz
5 Touch c or d next to Q.FACTOR to se-
lect the Q factor.
2W
—1W—1N—2N
6 Touch a or b to adjust the level of the
equalizer band.
+12dB to -12dB is displayed as the level is in-
creased or decreased.
# You can then select another band and adjust
the level.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Touch LOUDNESS on the audio function
menu.
2 Touch d to turn loudness on.
# To turn loudness off, touch c.
3 Touch c or d to select a desired level.
LOW (low)
—MID (mid)—HIGH (high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
! When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1 Touch SUB WOOFER on the audio func-
tion menu.
2 Touch d next to SUB WOOFER to turn
subwoofer output on.
# To turn subwoofer output off, touch c.
3 Touch c or d next to PHASE to select
the phase of subwoofer output.
Touch d to select normal phase and
NORMAL appears in the display. Touch c to
select reverse phase and REVERSE appears in
the display.
4 Touch c or d next to LEVEL to adjust
the output level of the subwoofer.
+6 to
–24 is displayed as the level is increased
or decreased.
5 Touch c or d next to FREQUENCY to se-
lect cut-off frequency.
Each time you touch c or d selects cut-off fre-
quencies in the following order:
50Hz
—63Hz—80Hz—100Hz—125Hz
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
Boosting the bass
Bass boost function boosts the bass level of
sound.
1 Touch BASS BOOSTER on the audio
function menu.
2 Touch c or d to select a desired level.
0 to +6 is displayed as the level is increased or
decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are output
from the front or rear speakers.
1 Touch HPF on the audio function menu.
2 Touch d next to HPF to turn high pass
filter on.
# To turn high pass filter off, touch c.
3 Touch c or d next to FREQUENCY to se-
lect cut-off frequency.
Each time you touch c or d selects cut-off fre-
quencies in the following order:
50Hz
—63Hz—80Hz—100Hz—125Hz
Operating this unit
En
36
Section
03