Pioneer AVH-P5000DVD - Manual (Page 40)

! With some discs, the parental lock may be ac-
tive only on the scenes with certain levels. The
playback of those scenes will be skipped. For
details, refer to the instruction manual that
came with the discs.
Changing the level
You can change the set parental lock level.
1 Touch NEXT on the DVD setup menu.
2 Touch PARENTAL.
3 Touch 0 to 9 to input the registered
code number.
4 Touch ENTER.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon
is displayed. Touch C and input the cor-
rect code number.
# If you forget your code number, refer to If you
forget your code number on this page.
5 Touch any of 1 to 8 to select the desired
level.
The new parental lock level is set.
If you forget your code number
Refer to Changing the level on this page, and
touch
C 10 times. The registered code number
is canceled, letting you register a new one.
Setting the DivX subtitle file
You can select whether to display DivX exter-
nal subtitles or not.
! The DivX subtitles will be displayed even
when CUSTOM is selected if no DivX exter-
nal subtitle files exist.
1 Touch NEXT on the DVD setup menu.
2 Touch DivX SUB TITLE to select the de-
sired subtitle setting.
! ORIGINAL – Display the DivX subtitles
! CUSTOM – Display the DivX external subti-
tles
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more then 126 characters are set,
the excess characters will not be displayed.
Displaying your DivX
®
VOD
registration code
In order to play DivX VOD (video on demand)
content on this unit, you first need to register
the unit with your DivX VOD content provider.
You do this by generating a DivX VOD registra-
tion code, which you submit to your provider.
1 Touch NEXT on the DVD setup menu.
2 Touch DivX VOD.
Your 8-digit registration code is displayed.
! Make a note of the code as you will need it
when you register with a DivX VOD provider.
Setting for digital output
Audio which is outputted from digital output
of this unit can be selected. Normally, set to
STREAM. If this unit
’s digital output is not
used, there is no need to change settings.
! Selecting Linear PCM enables you to
switch the output channel if playing the fol-
lowing type of discs. (Refer to Selecting
audio output on page 28.)
— Dual mono mode DVD video discs
1 Touch NEXT on the DVD setup menu.
2 Touch DIGITAL OUTPUT to select the de-
sired digital output setting.
! STREAM – The Dolby Digital/DTS signal is
output as it is (initial setting)
! Linear PCM – The Dolby Digital/DTS signal
is converted to and output as a linear PCM
signal
Operating this unit
En
40
Section
03