Philips DVDR3375/93 - Manual (Page 34)

E
n
g
lis
h
34
Rename disc
The original disc name is generated
automatically by the DVD recorder. You
can change the disc name by following
the steps below.
A Press TOP MENU, then use  keys
to select { Rename Disc } and press OK.
 The keyboard screen appears.
B Use   keys to highlight a
character on the keyboard and press OK
to select.
 The maximum input is up to 1
characters.
l
You can use the following keys on the
keyboard screen to edit your input:
BkSp : to remove the character to
the left of the cursor.
DELETE : to remove the character to
the right the cursor.
SPACE : to create a space between
characters.
CAPS : to toggle between upper and
lower case characters.
CLEAR : to clear the entry field
completely.
C To confirm your entry, select
OK on
the keyboard and press OK.
 The info panel is now updated.
l
To cancel the changes, select
EXIT on
the keyboard and press OK.
Erase disc (DVD±RW only)
This erases the content of the
DVD±RW including those that was not
recorded on this DVD recorder. Once
the existing content is erased, it can be
used for recording.
A Press TOP MENU, then use  keys
to select { Erase Disc } and press OK.
 A warning message will appear.
B Select
YES
in the menu to proceed or
NO
, to abort, then press OK to
confirm.
Record new title
This function allows you to start a new
recording at the remaining empty space
in the DVD±RW.
A Press TOP MENU, then use  keys
to select { Record New Title } and
press OK.
B Select the source you want to record
from and press REC l to start
recording.
Overwrite disc (DVD±RW only)
This function allows you to start a new
recording from the beginning of a
DVD±RW regardless of the contents of
the disc.
A Press TOP MENU, then use  keys
to select { Overwrite disc } and press
OK.
B Select the source you want to record
from and press REC l to start
recording.
Editing/Finalizing Recording
(continued)
TIPS: No further recording and editing can be carried out on a finalized DVD±R.
Press  to go back to the previous menu. Press DISC MENU to exit.