Philips DVDR3375/93 - Manual (Page 15)

E
n
g
li
sh
15
Optional Connections
(continued)
AC IN ~
VIDEO IN
• • • • •
AUDIO L
AUDIO R
VIDEO OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
RF S-VIDEO
OUT IN
AUDIO
R L
VIDEO
AU D IO O U T S-V ID E O IN
V ID E O IN
TV
A
Antenna/cable
TV signals
Back of a Cable Box or
Satellite Receiver
(Example only)
Back of a VCR
(Example only)
Connecting to a VCR and
Cable Box/Satellite Receiver
A Connect the Antenna/Cable TV signal to
the antenna input (RF IN) jack on the
VCR.
B Connect the antenna output (RF OUT)
jack on the VCR to the input(RF in) jack
on the Cable Box/Satellite Receiver.Then
connect the RF out on the Cable Box/
Satellite receiver to the ANTENNA IN
jack on the DVD recorder.
C Use the supplied RF coaxial cable to
connect the ANTENNA OUT jack on
the DVD recorder to the antenna input
jack on the TV .
D Use the audio/video cables to connect
the VIDEO/AUDIO IN-EXT on the
DVD recorder to the matching VIDEO/
AUDIO output jacks on the VCR.
E Use the audio/video cables to connect the
VIDEO/AUDIO OUT on the DVD
recorder to the matching VIDEO/AUDIO
input jacks on the TV.
Helpful Hints:
– You may use the S-VIDEO (Y/C) jack
instead of VIDEO (CVBS) jack if the
connected device has the same S-VIDEO
input/output jack. This video connection
provides better picture quality.
B
C
E
D
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.