Philips VR200/07 - Manual (Page 10)

Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
D When you search for TV channels manually, you can
choose between the indication for ’channel’ or
’frequency’. Please read the next paragraph
’Channel number or frequency display’.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the MENU button on the remote control. The main
menu will appear.
c
Select the line ’ MANUAL SEARCH’ with the P q or
P r button and confirm with the OK button.
CH 26 P01
------------------------
SEARCH g+ 0-9 OK
d
Hold the P q button until you have found the right TV
channel. A changing channel number or frequency will
appear on the screen.
D If you know the frequency or channel number of the
desired TV channel, you can enter the information in
line with the number buttons
0-9 on the remote
control.
D To enter a special/hyperband channel, you must
enter a ’9’ before the first channel digit. The
indication changes from ’CH’ to ’CA’. For example,
for special channel ’S 30’, enter ’9 30’.
e Confirm with the OK button.
f With the P q or P r button or with the number buttons
0-9 , select the programme number you want to give to
this TV channel, for instance, ’P01’.
g Confirm with the OK button.
If you want to allocate more TV channels, repeat steps
d
through
g
.
h
To end, press the TV/STANDBY m button.
Channel number or frequency display
You can switch between the display for ’channel number’ or
’frequency’ for manual channel search.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the MENU button on the remote control. The main
menu will appear.
c
Select the line ’ CHANNEL/FREQUENCY’ with the
P r or P q button and confirm with the OK button.
d With the P q button, select ’ CHANNEL’ or
’ FREQUENCY’ and confirm with the OK button.
e To end, press the TV/STANDBY m button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket
EXT.2 AV 2 .
To do this, select the channel number ’ E2’ by pressing the
buttons P q or P r . You will have to select the channels to
be received by the satellite receiver on the receiver itself.
Special installation functions
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV channel search (Autoinstall)
The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
D If you want to start the automatic TV channel search
again, then follow the instructions below.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the MENU button on the remote control. The main
menu will appear.
c Select the line ’ AUTOINSTALL’ with the P r or
P q button.
7