Philips VR 766/07 - Manual (Page 8)

C
ONNECTING TO A
TV
SET WITHOUT SCART SOCKET
E
NGLISH
8 8
5 Take a scart cable and connect one end to the
scart socket on the back of your TV set and
the other to the scart socket A AVV11 EEX XTT11 on
the back of the video recorder
6 Take the enclosed mains cable and connect
the appropriate end to the mains socket 4 4
on the back of the video recorder and the
other to the nearest free socket
1 Have the following cables (provided with your
new video recorder) ready: An aerial cable
and a mains cable
2 Switch off your TV set
C Coonnnneeccttiinngg ttoo aa TTVV sseett w wiitthhoouutt aa ssccaarrtt ssoocckkeett
8 You can find more details in the chapter “Initial
Installation”
7 Your set should automatically switch over to
the programme number allocated to video
recorder operation (usually: EXT, 0 or AV).You
will see the welcome screen.
PPRRO OBBLLEEM M
8 8 M Myy ssccrreeeenn iiss ssttiillll bbllaannkk
4 4 If a TV set receives a signal via the scart socket, it
usually switches automatically to the correspon-
ding programme number.This automatic function
might be adversely affected. Please switch manu-
ally to the corresponding programme number
(usually: EXT, 0 or AV)
4 4 Check the cable connections
Aerial cable
Mains cable
PPRRO OBBLLEEM M
8 8 II ccaann nnoott sseeee tthhee w weellccoom mee ssccrreeeenn,, oonnllyy tthhee m meessss--
ssaaggee ““ EEAASSYYLLIINNKK IISS LLOOAADDIINNGG DDAATTAA FFRROOMM TTVV ””
4 4 Congratulations! The TV set supports the “Easylink”
function. It automatically sends the settings for the
available TV channels and the time and date infor-
mation straight to the video recorder. As soon as
the transfer is complete, the current settings for
year, month, date and time appear on the screen.
Correct and/or confirm the settings with the arrow
buttons ;, =, Q and/or P the number buttons 00--99
and confirm with O OK K.
AV1 EXT1
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEORECORDER
TO CONTINUE PRESS OK