Philips VR 766/07 - Manual (Page 45)

E
NGLISH
“T
URBO
T
IMER
”-R
ECORDING
45 45
5 The display shows the programme number to
which the video recorder is currently set,
e.g.: “P01”. Change – if necessary – the
displayed programme number with ==PP-- or ;;PP++..
1 Press the TTU URRBBO O TTIIM MEERR button on the
remote control.
““TTuurrbboo TTiim meerr””--RReeccoorrddiinngg
2 The display shows the actual starting time,
e.g.: “20:00”. Change – if necessary – the
displayed start time with ==PP-- or ;;PP++
FFO ORR
EEX XPPEERRTTSS
A Accttiivvaattee VVPPSS//PPD DC C
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. Use SSEELLEEC CTT to switch
recognition of these signals on (VPS/PDC appears in
the display) or off.
3 Confirm with O OK K
4 The display shows a suggestion for the end of
the recording e.g.: “22:00” (Start time + 2
hours). Change – if necessary – the displayed
finish time with ==PP-- or ;;PP++.. Confirm with O OK K
P 0 1
S T 1 7 :
3 0
E N 1 9 :
3 0
Using the “Turbo Timer”, you can make a programmed recording
within the next 24 hours quickly and simply, without having to
switch on the TV set.All you need to do now is enter or confirm
the desired programme number and start and finish time in the
video recorder.
6 Confirm with the TTU URRBBO O TTIIM MEERR button.
The display briefly shows “OK”.
FFO ORR
EEX XPPEERRTTSS
SSeelleeccttiinngg tthhee rreeccoorrddiinngg ssppeeeedd
You have the option of two playback and recording speeds:
Standard Play (SP) offers the usual first-class picture quality,
and with Long Play (LP) you can for example (with
somewhat reduced picture quality) record about 360 minutes
on a 180-minute cassette. Use SSEELLEEC CTT to enter the required
setting.When “Long Play” is chosen, “LP” will light up in the
display.