Polycom QSX 3725-22370-001/B - Manual (Page 54)

User 1: 128Kbps
User 2: 128Kbps
User 3: 56Kbps
As a result, the Time Sharing Mode is recommended for an environment with
connections of 128kbps-384kbps. In order to configure the Time Sharing option, follow
these steps:
1. Log on to the QSX Admin Web as described on Page 23 .
2. Go to Table of Contents.
3. Go to Admin Settings > Table of Contents > General Settings > Bandwidth.
4. From the pull down menu for the Web Viewer Bandwidth Option, choose “Time
Sharing”.
5. Click the Update button.
Bandwidth Sharing
In the Bandwidth Sharing mode, the total bandwidth allowed for the web viewers is
divided by the total number of participating web viewers. If, for example, there is a total
bandwidth of 1024Kbps and three web viewers, then the maximum amount of bandwidth
that each user will be allocated is:
1024Kbps / 3 web viewers = 340Kbps per web viewer
In the Bandwidth Sharing mode, each web viewer will be allocated a minimum of
32Kbps.
The advantage of the Bandwidth Sharing mode is that each web viewer can work
independently, based on its own bandwidth allocation without being affected by a web
viewer that has a slow connection. The disadvantage is that the sum of the allowed
bandwidth of all web viewers may exceed the configured bandwidth setting, possibly
causing some congestion. The Bandwidth Sharing mode is recommended in corporate
LAN environments where there is
little risk of exceeding configured bandwidth.
In order to configure the Bandwidth Sharing option, follow these steps:
1. Log on to the QSX Admin Web as described on Page 23 .
2. Go to Table of Contents.
3. Go to Admin Settings > Table of Contents > General Settings > Bandwidth.
4. From the pull down menu for the Web Viewer Bandwidth Option, choose
“Bandwidth Sharing”.
5. Click the Update button.
54