Polycom QSX 3725-22370-001/B - Manual (Page 32)

4. Click Next and configure these settings:
Settings Description
Date Format
(default: MM-dd-yyyy) Specifies your format preference for the date display
and lets you enter your local date.
Time Format
(default: 12 Hour) Specifies your format preference for the time display
and lets you enter your local time.
Daylight Saving Time
(default: enabled) Specifies daylight savings time setting. When you
enable this option, the system clock moves ahead
one hour. When you disable this option, the system
clock moves back one hour.
Time Difference from GMT
(default: -06:00) Specifies the time difference between GMT
(Greenwich Mean Time) and your location.
Display Time in Call
(default: Elapsed Time)
Specifies the time display in a call:
• Elapsed Time – Displays the amount of time in the
call.
• Local Time – Displays the local time on the screen
during a call.
• Off – Time is not displayed.
Time Server
(default: Auto) Specifies connection to a time server for automatic
system time settings.
Time Server Address Lets you specify the IP address of the server when
Time Server is set to Manual.
Serial Port
The QSX system provides an RS-232 serial port for configuring a static IP address. The
QSX system is configured as DCE (Data Communications Equipment).
To configure serial port settings:
1. Log on to the QSX Admin Web as described on Page 23 .
2. Go to Admin Settings > General Settings > Serial Ports.
3. Configure these settings, and make sure that they match the configuration of your
computer serial port.
32