Display contrast, Headset memory mode, Display contrast –3 headset memory mode –3 – Polycom IP 320 User Manual
Page 23
Customizing Your SoundPoint IP 330/320 Phone
2 - 3
5.
Press
to confirm your choice.
For example, the following figure shows Clock Time.
6.
Press
or
repeatedly to return to the idle display.
Display Contrast
To adjust the contrast on the display to a comfortable level:
1.
Press .
2.
Select Settings > Basic > Contrast.
3.
Press the Up or Down soft keys to increase or decrease the display
contrast.
4.
Press the Save soft key to accept changes or
to cancel changes.
5.
Press
or
repeatedly to return to the idle display.
Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1.
Press .
2.
Select Settings > Basic > Preferences > Headset Memory.
3.
Use the
or
to select Enabled.
This manual is related to the following products: