Panasonic PT-52LCX15 - Manual (Page 21)

21
Getting Start
ed
RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed
correctly, or a black background may be displayed. In this case, “signal” will flash on-screen for about 5
seconds.
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.
Mode type
Signal data
Information menu
display No. of dots
(H × V)
Horizontal frequency
(kHz)
Vertical frequency
(Hz)
Personal Computer
Signals
VGA400 (70 Hz) 640 × 400 31.47 70.08 VGA400
VGA480 (60 Hz) 640 × 480 31.47 59.94 VGA480
SVGA (60 Hz) 800 × 600 37.88 60.32 SVGA
* XGA (60 Hz) 1 024 × 768 48.36 60.00 XGA