Your pyle pro series performance mixer, Features and controls: pyd1010 mixer, Owner’s manual table of contents – PYLE Audio 1020 User Manual

Page 2

Your PYLE PRO Series Performance Mixer

is a sophisticated control center, perfect for mixing sound from multiple playback sources such as

microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly

constructed for home or professional use. Wide range volume controls permit you to adjust sound levels

accurately to achieve just the right mix for playing through your speaker system or for recording.

Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a

range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect

years of trouble-free service from this product.

Input/Output Features: PYD1010/1015/1020

Stereo Line Inputs let you connect most high-level audio

sources, such as CD players, tape deck, tuner or VCR.

Dual Purpose Stereo Inputs for using a turntable with a

magnetic cartridge OR a high level input source

MIC2 Microphone rear panel

connector permits you to connect a

balanced or unbalanced low

impedance microphone with 1/4” plug.

Ground Screw for turntables

Input Select Switches – set these switches based on what

is plugged into Phono1/Line1 and Phono2/Line3 input jacks

Output Jacks to connect the mixer to a

receiver or amplifier – choose to use cables

with either 1/4” jacks or RCA plugs.

Zone Output Jacks to connect the mixer

to a second receiver or amplifier powering

speakers in the DJ booth or in a remote

location

Record Output Jacks to connect the

mixer to a tape deck for recording the

mixed program

Features and Controls: PYD1010 Mixer

Dual Display Meter displays your choice

of Master Input Left and Right Levels, or

Phones Output Levels for CUE and PGM

MIC Talkover

Switch lowers the

level of input sources,

permitting you to talk

over them using a

microphone

Zone Level Control permits

adjustment of the volume of the

Zone Output, if you have

installed speakers in the DJ

booth or a remote location

Balance Control adjusts the

balance between Left and Right

speakers

Master Level Control adjusts

the mixer’s overall output

volume level

Input Source Selector lets you

easily select your choice of audio

inputs for mixing

Channel Gain

Controls let you

adjust the gain of

each input source

Channel Tone

Controls permit

adjustment of the

treble, midrange

and bass of a

selected input

Kill Tone Frequency

Buttons let you

eliminate the selected

frequency range

instantly (great for

special effects); the

LED is illuminated

when the kill switch

is activated.

BNC lamp socket allows you

to add a 12V/3W lamp to

illuminate the control panel

MIC 1 Level

Control adjusts

the microphone

volume level

within the mix

Channel Level Controls

allow fingertip control of all

sound mixing and fading

Crossfader Assign Switches

(A and B) let you select the input

sources for crossfade mixing

Crossfader Control

lets you quickly and smoothly

switch and mix between two

playing input sources

Cue Level Control sets the

listening level for the

headphones

Power Switch and LED

indicator

Meter Mode Switch and LED Indicators permit

you to display either Cue and Summed Program

levels OR Left and Right Channel Levels

Headphone Jack accepts 1/4”

plug

MIC 1(DJ Mic)

Input Jack

accepts balanced

or unbalanced

inputs with either

XLR or 1/4” plug

Cue Selectors let you “preview”

an input source, using the

headphones, so you can adjust

the volume prior to mixing it in

MIC 2 Level

Control controls the

volume of the

secondary

microphone

Pyle Pro Mixer Owner’s Manual – 1

i – Pyle Pro Mixer Owner’s Manual

Owner’s Manual Table of Contents

Input/Output Features

Features and Controls: PYD-1010

Features and Controls: PYD-1015

Features and Controls: PYD-1020

Presetting Controls Before Use

Connecting the Outputs

Playing the Mixer’s Output Signal

Recording the Mixer’s Output Signal

Monitoring the Mixer’s Output Signal in DJ Booth

Connecting the Mixer Inputs

Connecting the Lamp

Using Headphones

Using the Mixer Controls

Using the Microphone

Using the Crossfader

Using the Gain Controls

Using the Tone Controls

Using the Kill Frequency Switches

Using the Zone Level Control

Using the Master Balance Control

Using the Master Level Control

Dual Meter Modes

Using the Punch Controls

(PYD-1015/PYD-1020)

Using the Echo Controls

(PYD-1020)

Troubleshooting

Care and Maintenance

Specifications

Warranty

This manual is related to the following products:

1015 PYD1010