Panasonic KXL-CB30AU - Manual (Page 14)

Intr
oduction
14
Compatible Discs
Using TYPE2 / TYPE4 DVD-RAMs
Removing a Disc from a Cartridge
To remove a disc from a cartridge, follow the procedure shown below.
[The discs illustrated below are Panasonic 12 cm DVD-RAMs. When using
other discs, refer to instructions supplied with discs.]
To remove a disc from TYPE2 cartridge
1
Break and remove the locking pin
using a pointed object such as a
ballpoint pen.
2
Open the cover of the cartridge
pressing the hole located on the left
side with a pointed object.
3
Remove the disc horizontally, taking
care not to soil or damage the disc.
DV
D-R
AM
Label side
When storing a disc
B Match the label side of the disc with the label side of the cartridge and insert fully.
B Check the setting of the write-protect switch after closing the cover.
Cautions
B Do not try to open the cover by force.
B Do not insert discs other than DVD-RAM into empty cartridges.
B Take care that the disc’s recording surface is not contaminated with
fingerprints, dirt, dust, scratches, or liquids. Do not write on the recording
surface.
B Write on the label side of the disc only with a soft, oil-based felt pen. Do not
use ballpoint pens or other hard writing implements.
B Do not attach other labels or protective covers. Do not use coatings.
B Clean the disc with the special DVD-RAM/PD disc cleaner*. Do not use
benzine, thinners, anti-static fluids, or any other solvent.
B Return discs to their cartridges when you are not using them.
B Do not drop or bend discs.
* Use LF-K200DCA1 for cleaning.