ParaBody 426103 - Manual (Page 7)

7
FIGURE 10
STEP 10
STEP 11
• Assemble three 72” ELASTIC CORDS to the KEYHOLE CLEVIS as
shown in FIGURE 11.
• Position two 3/8 X 1/2” SPACERS (2) inside the rear bracket of the TOP BOOM and slide one 3/8” THREAD SHAFT (9) through the
bracket. See FIGURE 10.
TOP BOOM
7
8 3/8” HEX NUT
6
9
8 3/8” HEX NUT
6
5
7
5
FIGURE 11
• SECURELY assemble two 2” PULLEYS (5) to the rear bracket on the TOP BOOM using one 3/8” THREADED SHAFT (9), two 3/8”
WASHERS, two 3/8” HEX NUTS (8), and two 3/8” LOCK NUTS (7) as shown in FIGURE 10.
2