ParaBody 426103 - Manual (Page 4)

FIGURE 5
STEP 5
• Remove the 3/8 X 2” BOLT, two 3/8” WASHERS, one 2-7/8” L-BRACKETS, one 4-1/2” PULLEY, and one 3/8” LOCK NUT from the
upper flat on the BASE as shown in FIGURE 5.
FIGURE 6
STEP 6
• SECURELY assemble the previously removed 4-1/2” PULLEY to the BASE using one 3/8 X 2-1/2” BOLT (1), two previously removed
3/8” WASHERS, one previously removed 2-7/8” L-BRACKET, one SWIVEL SNAP (3), one 3/8” HEX NUT (8), and one previously
removed 3/8” LOCK NUT. See FIGURE 6.
4
BASE
1 3/8 X 2-1/2”
BASE
3/8” WASHER
4-1/2” PULLEY
3/8” WASHER
3/8” LOCK NUT
2-7/8” L-BRACKET
3/8” X 2” BOLT
3/8” WASHER
4-1/2” PULLEY
2-7/8” L-BRACKET
3
8 HEX NUT
3/8” LOCK NUT
3/8” WASHER