ParaBody 426103 - Manual (Page 30)

FIGURE 8
STEP 8
30
• Remove the 3/8 X 2-1/4” BOLT, two 3/8” WASHERS, one 3/8” LOCK NUT, and 3-1/2” PULLEY from the bracket on the TOP BOOM
as shown in FIGURE 8.
3/8” LOCK NUT
3/8” X 2-1/4”
3-1/2” PULLEY
3/8” WASHER
TOP BOOM
FIGURE 9
STEP 9
• SECURELY assemble the previously removed 3-1/2” PULLEY to the bracket on the TOP BOOM using one 3/8” THREADED SHAFT
(9) , two previously removed 3/8” WASHERS, two 2” PULLEYS (5), two 3/8” HEX NUTS (8), one previously removed 3/8” LOCK
NUT, and one 3/8” LOCK NUT (7). See FIGURE 9.
TOP BOOM
3-1/2” PULLEY
3/8” LOCK NUT
3/8” WASHER
9
8 3/8” HEX NUT
5 7
3/8” WASHER
3/8” HEX NUT 8