POLAR S810 - Manual (Page 18)

B 33 B 32
Predicted maximum heart rate on/off (HR
max
-p)
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
6. Press OK to start setting the HR
max
-p. On/OFF starts to flash.
7. Scroll up or down to set the HR
max
-p on or off. Press OK.
HR
max
-p can be turned on only if Polar Fitness Test is on.
Online recording to computer on/off
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Online is displayed.
6. Press OK to start setting the online recording. On/OFF starts to flash.
7. Scroll up or down to set the online recording on or off. Press OK.
To use this function you need an optional Polar IR Interface.
To continue your settings, press the stop button or to return to the Time of
day display, press and hold the stop button.
Options
Function Set
OwnCal Fit. Test HR max -p Online
On/OFF On/OFF On/OFF On/OFF
1. In the Time of day display scroll up or
down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
3. Scroll up or down until
FUNCTION SET is displayed.
4. Press OK to start the function settings. OwnCal is displayed.
To set the following functions on you have to set your user information.
If kg/lbs are displayed as you start setting the function on, the wrist
receiver points out that you have not set your all user information.
OwnCal calorie counter on/off
If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the OwnCal function. On/OFF starts to flash.
6. Scroll up or down to set the OwnCal on or off. Press OK.
For getting the most accurate OwnCal results, update the VO
2max
setting
and the HR
max
setting with clinically measured values (if available). If you do
not know your clinically measured values perform Polar Fitness Test and
update the OwnIndex and HR
max
-p settings in Fitness Test mode.
Fitness test on/off
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Fit. Test is displayed.
6. Press OK to start setting the fitness test. On/OFF starts to flash.
7. Scroll up or down to set the fitness test on or off. Press OK.
Turning functions on/off
S810 manual GBR A.pm6 23/4/01, 15:53 32-33