Pride Mobility Mobility Power Chair - Manual (Page 18)

18 Basic Operation Instructions
Synergy TRU-Balance Power Recline www.quantumrehab.com
POWER ARTICULATING LEG RESTS OPTION
The power articulating leg rests maintain the correct knee-to-heel measurements
when the user’s legs are being elevated and can be adjusted either as a pair or
individually. See figure 11. The power articulating leg rests provide 70° or 80° of
movement, have standard swing-away calf pads that are depth and height adjustable,
accept all foot plates, and have a maximum weight capacity of 300 lbs. (136 kg).
They are available with all power bases that support upgraded electronics and
that are available with Synergy Seating Systems. The power articulating leg rests
operate through the power chair controller, toggle switch, or Attendant Control
Module.
NOTE: Operation instructions using the 4-way toggles are discussed be-
low. If you are using a different toggle, the Attendant Control Module, or
a different operating device, please refer to the appropriate section of this
manual or the operation manual supplied with that device and/or your
power chair owner’s manual.
NOTE: For information on operating individual power articulating leg
rests, please refer to the appropriate section of this manual that refers to
the controller you are using, or contact your Quantum Rehab Specialist.
To operate the combined leg rests:
1. Push the toggle switch to the right to elevate both leg rests.
2. Push the toggle switch to the right, release, then push to the right again to
lower both leg rests.
Figure 11. The Power Articulating Leg Rests Option