Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 78)

6-20 Defining Bar Code Fields
Enter Field #
(First is Fld One)
( ENTER when done )
> _ _ 40. Type 1 and press e for source field 1.
Enter Start Position
(First is One)
> _ _ 41. Type 1 and press e for copy start
position 1.
Enter # of Chars
> _ _ 42. Type 6 and press e for 6 characters to
copy.
Enter Field #
(First is Fld One)
( ENTER when done )
> _ _ 43. Type 2 and press e for source field 2.
Enter Start Position
(First is One)
> _ _ 44. Type 1 and press e for copy start
position 1.
Enter # of Chars
> _ _ 45. Type 6 and press e for 6 characters to
copy.
Enter Field #
(First is Fld One)
( ENTER when done )
> _ _ 46. Press e to continue.
Enter Fill-Direction
for short
Source Fields:
1 Fill from Left
2 Fill from Right
3 Do not Fill 47. Press 3 to not fill the field.
Enter Fixed Data
Press ENTER if none
> _ _ _ _ _ _ _ _ _ _ _ _
L
48. Press e for no fixed data.
Enter Row #
> _ _ _ 49. Type 100 for the row location. Press e.
Enter Col. #
> _ _ _ 50. Type 10 for the column location. Press
e.