Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 11)

Introduction 1-3
Proportionally
spaced font Font with variable character spacing – all characters have
different widths. For example, an “i” versus a “w.”
Proportionally spaced fonts include CG Triumvirate, CG
Triumvirate Condensed, and CG Triumvirate Bold.
Quiet Zone An area of white space required at the beginning and end of
a bar code to allow scanning. Also at the beginning/end and
edges of a label. Also know as non-print zone.
Segment line type A line type with a starting point and an end point.
Start/stop
character Distinct characters used at the beginning and end of each
bar code symbol that provides initial timing references and
indicates the direction of scanning.
Variable length
bar code A bar code of variable character length: I2 of 5, Code 39,
Codabar, Code 128, MSI, PostNet, and Code 93.
Vector line type A line type with a starting point, angle, and length of line.
Vertical bar code
or text Data that is rotated and prints down the length of a label.
Void Light area on a label in a bar code or text.
L a b e l S i z e s
The printer allows you to print the following label sizes.
Supported Supply
Widths:
1.20 Inches
1.50 Inches
2.00 Inches Supported Supply Lengths:
.55 inches
.785 inches
1.1 inches
1.5 inches
2.0 inches
3.0 inches
4.0 inches
NOTE: Most of the sample formats in this manual use 2” X 2” labels unless
indicated otherwise.
Call 1-800-543-6650 for more information about the various label sizes and
label types available with this printer.