Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 44)

5-4 Defining Text Fields
Font The style of font for your format. Choices include CG
Triumvirate Bold 6.5, 8, 10, 12, 18, or 22 point; CG
Triumvirate Bold Condensed 6.5, 8, 10, 12, 18, and 22 point;
and Letter Gothic 6.5 and 9 point.
Height
Magnification Height magnifier for the selected font. Use a magnifier of 1
with proportionally spaced fonts, because characters lose
smoothness at higher magnifications. The range is 1 – 7.
Width
Magnification Width magnifier for the selected font. Proportionally spaced
fonts do not have a set width. The range is 1 – 7.
Font Color Depending on your printer’s configuration, enter the color of
the selected font. For more information about your printer’s
configuration, see Chapter 3, “Configuring the Printer.”
Solid black print should not exceed 30% on a given square
inch of the label, or printhead life may be decreased. There
are two types of field color overlay attributes:
Transparent The overlay field (text or
constant text) does not block
out or “erase” existing fields.
Opaque The overlay field blocks out or
“erases” existing fields.
Field placement is an important consideration when using
field color attributes. If a line field is defined before the
overlay (text or constant text) field, the line field is blocked
out by the overlay field, depending on the overlay field's
color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field's color attribute.
Choices include Black Opaque, White Opaque, Black
Transparent and White Transparent.
Justification Alignment of the text within the field. Choices include Left
(L), Right (E), and Center (B). Fonts 1012 and 1013 (Letter
Gothic 6.5 and 9 pt) default to L (left), regardless of
selection.
Line field
blocked
out by
opaque
field using
attribute B
Line field
not
blocked
out by
transparent
field using
attribute O